高光效高热稳定性蓝色荧光粉Ca2-ySrySiO4:Ce3+,Li+的组成筛选和发光机理

采用高温固相法合成了一系列Ca_(2-x-y)Sr_(y-x)SiO_4∶x Ce~(3+),x Li~+蓝色固溶体荧光粉。XRD结果表明,所合成的固溶体荧光粉均为单一物相。随着Sr~(2+)成分的增加,Ca_(2-y)Sr_y SiO_4物相从单斜晶系β-Ca_2SiO_4向正交晶系α′-Ca_2SiO_4转变,发射光谱逐渐红移。组成为Ca_(1.75)Sr_(0.25)SiO_4时,荧光粉的发射波长最长(454 nm),Stokes位移最大。基质为Ca_(1.1)Sr_(0.9)SiO_4的晶体结构可诱导掺杂离子Ce~(3+)取代SrO_(10)格位、Li~+取代CaO8格位。优化的荧光粉Ca_(1.05)Sr_(0.85)SiO_4∶0.05Ce~(3+),0.05Li~+(CS_(0.85)SO∶CeLi)在375 nm紫外光激发下,发射445 nm的蓝光,内量子效率(IQE)达到91.18%,200℃时发射强度保持室温发光强度的98.70%。根据晶体结构、晶体场分裂和掺杂离子质心位移等理论,讨论了CS_(0.85)SO∶CeLi综合发光效应最佳的内在原因。     

Current Efficiency,Corrosion and Structural Changes in SnO2-Sb2O3-CuO Inert Anodes for Aluminium Electrolysis

A systematic study was conducted on current efficiency （CE）, corrosion and structural changes in SnO2-based inert anodes （made of 96wt%SnO2＋2wt%Sb2O3＋2wt%CuO） on a laboratory Hall-Heroult aluminium cell. The influence of operating parameters and electrolyte composition on the CE and corrosion process were evaluated. The CE was found to be more than 90% and catastrophic corrosion took place at low percent of Al2O3, high percent of LiF, low cryolite ratio and high current densities. From all the structural changes that took place in the SnO2-based inert anodes, we assumed that the most important contribution was due to the migration of CuO towards the outer limits of the constituent grains of SnO2 based ceramic. The complex process occurred during the formation of various phases and their sintering ability both directly depended on Cu/Sb molar ratio.     

Characterization and kinetic performance of 2.1 × 100 mm production columns packed with new 1.6 μm superficially porous particles

The overall kinetic performance of three production columns (2.1 mm × 100 mm format) packed with 1.6 μm superficially porous CORTECS‐C₁₈+ particles was assessed on a low‐dispersive I‐class ACQUITY instrument. The values of their minimum intrinsic reduced plate heights (h_min = 1.42, 1.57, and 1.75) were measured at room temperature (295 K) for a small molecule (naphthalene) with an acetonitrile/water eluent mixture (75:25, v/v). These narrow‐bore columns provide an average intrinsic efficiency of 395 000 plates per meter. The gradient separation of 14 small molecules shows that these columns have a peak capacity about 25% larger than similar ones packed with fully porous BEH‐C₁₈ particles (1.7 μm) or shorter (50 mm) columns packed with smaller core–shell particles (1.3 μm) operated under very high pressure (>1000 bar) for steep gradient elution (analysis time 80 s). In contrast, because their permeabilities are lower than those of columns packed with larger core–shell particles, their peak capacities are 25% smaller than those of narrow‐bore columns packed with standard 2.7 μm core–shell particles.     

Ag修饰的Fe_3O_4/TiO_2复合磁性纳米纤维的制备及光催化性能

通过静电纺丝法制备了含有Fe3O4纳米粒子的TiO2纳米纤维,采用水热法对该纤维表面进行纳米Ag修饰,制备出具有较强磁性和较好光催化性能的复合纤维.采用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和紫外-可见光谱(UV-Vis)等对样品的结构和形貌进行表征,并以罗丹明B(Rh B)水溶液降解为模型反应,考察样品在紫外光照射下的光催化性能.结果表明,所制备的TiO2为锐钛矿结构,Fe3O4纳米粒子均匀分布在TiO2纤维中,Ag纳米颗粒比较均匀地分散在磁性TiO2纤维表面.经过纳米Ag修饰后,材料的光吸收能力大为增强,吸收带红移并扩展到可见光区.在紫外光照射40 min后,合成样品对Rh B的降解率达到99.5%.此外,Fe3O4纳米粒子的存在使该材料具有较强的磁性,可通过外加磁场将其分离回收.     

Synthesis of Star-like Polybutadienes by a Combination of Living Anionic Polymerization and “Click” Coupling Method

Three-arm and four-arm star-like polybutadienes(PBds) were synthesized via the combination of living anionic polymerization and the click coupling method. Kinetic study showed that the click reaction between the azido group terminated PBd-t-N3 and the alkyne-containing multifunctional linking reagent was fast and highly efficient. All coupling reactions were fully accomplished within 40 min at 50 °C in toluene in the presence of the reducing agent Cu(0), proven by 1H-NMR, FTIR and GPC measurements. For the coupling reactions between the PBd-t-N3 polymer and dialkyne-containing compound, the final conversion of the coupled PBd-PBd polymer was ca. 97.0%. When a PBd-t-N3 polymer was reacted with trialkyne-containing or tetraalkyne-containing compound, the conversion of three-arm or four-arm PBd was around 95.5% or 87.0%, respectively. Several factors influencing the coupling efficiency were studied, including the molecular weight of the initial PBd-t-N3, arm numbers and the molar ratio of the azido group to the alkynyl group. The results indicated that the conversion of the target products would be promoted when the molecular weight of the PBd-t-N3 was low and the molar ratio of the azido to alkynyl groups was close to 1.     

铒激光脉冲消融泌尿结石和胆结石比较研究

利用光学弱相干显微成像系统对脉冲激光消融硬生物组织后形成的凹坑二维和三维形貌进行了扫描,分析了Erbium∶YAG激光脉冲消融生物硬组织特性.结果表明:相同激光参量条件下,消融胆结石比消融泌尿结石具有更高的消融效率;消融胆结石或消融泌尿结石时,脉冲能量越大,消融效率越高;消融效率提高主要体现在凹坑表面直径更宽、高度更深...     

放电脉冲重频准分子激光器在不同应用领域的发展现状(英文)

研究了脉冲宽度为25～40 ns的放电脉冲XeCl准分子激光器的工作参数。结果显示,激光器产生的脉冲能量为0.2～0.7 J,重复频率为100 Hz,表明在泵浦功率为2.8～3.3 MW/cm3时,激光器实现了2.6%的激光效率和3.8%的本征效率。     

聚合物发光二极管面光源的光热特性

运用传输矩阵法及MATLAB软件模拟计算了以MEH-PPV为发光材料的PLED面光源出光率,分析了发光层、PEDOT层、ITO层对器件出光率的影响.模拟分析了玻璃表面半球形、圆台形、圆锥形3种微形貌对器件出光率的影响.仿真结果表明,玻璃表面为圆锥形微散射层对提高器件出光率最有利,且出光均匀性最好.最后分析了PLED面光...     

用于抛物柱面空间功率合成天线的功分喇叭阵列

 提出了一种用于偏馈抛物柱面反射天线的功分喇叭。由于改善了口面上的电磁分布,该功分喇叭可以让馈源阵列的栅瓣电平抑制到－28 dB。用FEKO进行仿真发现,与传统用角锥喇叭阵列作为馈源的抛物柱面反射天线相比,使用功分喇叭直线阵列可以使空间功率合成天线的效率从68%提高到80%,同时天线的增益也能增加0.7 dB。     

主振荡功率放大装置中的放大自发辐射效应和能量提取效率

 建立了放大自发辐射(ASE)和相干激光能流耦合的模型,使用迭代算法,计算了长方体形状放大级中的ASE能流和相干激光能流的分布以及放大级出口0.5 m处的ASE分布,并讨论了入射光强、饱和光强对输出功率及能量提取效率的影响。对于增益区呈长方体、增益系数沿流场方向呈抛物线分布的放大级的计算结果表明：输入光的存在不仅会降低放大级中ASE光强的大小,而且将改变ASE的分布,使放大级中ASE能流的极大值向入口处移动;在饱和光强一定的情况下,输出功率和能量提取效率将随着入射功率的增大而增大;在入射光强一定的情况下,输出功率将随着饱和光强的增大而增大,而能量提取效率将随着饱和光强的增大而减小。